Bench Standard Consulting — Aggregate FAQ

Question 1

What does a CAP mock inspection actually cover?

Accepted Answer

A Bench Standard mock inspection simulates a real CAP survey day. We use the current edition of the All Common, Laboratory General, and discipline-specific checklists; score every applicable item; observe staff in real workflow; and deliver a written findings report categorized as Critical, Major, or Minor with corrective-action deadlines mapped to specific checklist items. The methodology is anchored to CAP's Laboratory Accreditation Program inspection process and 42 CFR §493.1230 series quality system requirements.

Question 2

How long does a CAP rapid readiness engagement take?

Accepted Answer

Two to four weeks for a Mock Inspection engagement (typical), four to six weeks for a Competency Assessment Program build, and four to eight weeks for a QC Program Design engagement. Each timeline is published, fixed, and stated on the service page before you sign.

Question 3

What are the six elements of CLIA competency assessment?

Accepted Answer

Per 42 CFR §493.1451(b)(8): direct observation of routine patient testing; monitoring the recording and reporting of test results (including intermediate results, QC records, proficiency testing records, and preventive maintenance records); direct observation of instrument maintenance and function checks; assessment via previously analyzed specimens, internal blind samples, or external proficiency testing samples; problem-solving skill assessment; and evaluation of analytical interpretation skill. All six are required — not optional, not selectable.

Question 4

Who can perform competency assessments under CLIA?

Accepted Answer

For high-complexity testing personnel, the technical supervisor (TS) is the assessor of record, with delegation rules defined under 42 CFR §493.1451. For moderate-complexity testing, the technical consultant (TC) is the analog assessor under 42 CFR §493.1413(b)(8). Delegation must be documented; the TS retains responsibility regardless of who performs the observation.

Question 5

When did CMS stop sending paper CLIA certificates?

Accepted Answer

Effective March 1, 2026. After that date CMS does not issue paper certificates or mail fee coupons. All CLIA fees flow through Pay.gov; certificates and inspection notices arrive via the email address of record. Labs must (1) register a monitored email, (2) add CMS to the safe-senders list, and (3) ensure CMS-116 elects electronic communication.

Question 6

What is CMS-3326-F?

Accepted Answer

CMS-3326-F is the CLIA final rule published December 28, 2023 (Fed. Reg. doc. 2023-28170) that updated personnel qualifications under 42 CFR Part 493 Subpart M, effective December 28, 2024. It changed the educational and experience requirements for laboratory director, technical consultant, technical supervisor, clinical consultant, general supervisor, and testing personnel. (Note: CMS-3355-F is a separate, earlier rule covering CLIA proficiency testing analytes, not personnel.)

Question 7

What are the required elements of a CAP-compliant SOP?

Accepted Answer

The minimum element set under CLSI QMS01-Ed5 (formerly GP26) is: title, purpose, scope, principle, specimen requirements, reagents and materials, quality control, calibration, procedural steps, results reporting, expected values, calculations, limitations, safety, references, and a document-control footer. CAP All Common GEN.20377 enforces biennial review with director signature.

Question 8

How often do laboratory SOPs need to be reviewed?

Accepted Answer

At minimum biennially under CAP All Common GEN.20377, with director or designee signature dating each review. Whenever a method changes, an instrument changes, a reagent lot changes in a way that affects the SOP, or a regulatory advisory affects the procedure, the SOP must be revised — not just re-signed.

Question 9

What are Westgard rules and which ones should our lab use?

Accepted Answer

Westgard rules are multi-rule statistical control procedures (1-3s, 2-2s, R-4s, 4-1s, 10x, etc.) that combine to balance error detection against false rejection. The right combination depends on the analyte's sigma metric — high-sigma methods need fewer rules; low-sigma methods need tighter rules. The program selects rules per analyte from the lab's actual performance data.

Question 10

What is IQCP?

Accepted Answer

The Individualized Quality Control Plan is a CMS-recognized QC pathway under 42 CFR §493.1256 that allows the lab, after a documented risk assessment, to use the manufacturer's recommended QC frequency rather than the default external QC frequency.

Question 11

What is the difference between RUO and clinical testing under CLIA?

Accepted Answer

Research-use-only (RUO) testing is performed for research purposes only and is not used to make patient management decisions. Clinical testing under CLIA generates results used for diagnosis, treatment, or management of a patient. The CLIA program applies to clinical testing — every clinical specimen run for billing or clinical use requires the lab to hold an appropriate CLIA certificate.

Question 12

What is an LDT and how is it validated?

Accepted Answer

A Laboratory Developed Test is a test designed, manufactured, and used within a single CLIA-certified high-complexity laboratory. Under CLIA, LDTs require analytical validation covering accuracy, precision, sensitivity, specificity, reportable range, and reference intervals; high-complexity LDTs also require clinical performance characteristics.

Question 13

Is hourly billing available?

Accepted Answer

No. Every engagement is fixed-fee against a written scope. Hourly billing misaligns incentives. Invoicing is 50% at engagement start and 50% at delivery, net 15.

Question 14

What is the difference between this and hiring a compliance officer?

Accepted Answer

A dedicated compliance FTE costs $90,000–$140,000 fully loaded in the DMV market. The Monthly Compliance Retainer at $1,500–$3,000/month covers regulatory monitoring, SOP review cycle, and competency-program oversight — at $18,000–$36,000 annually. The retainer does not provide on-site daily presence; for labs that need expertise but not daily presence, the retainer replaces the FTE.

Question 15

Why does the consultant being active on the bench matter?

Accepted Answer

Compliance is downstream of operations. A consultant who has not run a bench in five years writes recommendations that look right on paper but break the actual workflow. Active bench experience keeps the recommendations operational — they survive contact with a Saturday short-staffed shift.

Question 16

Do you work with biotech startups in Maryland's I-270 corridor?

Accepted Answer

Yes. Startup Lab Consulting ($5,000–$10,000) covers the regulatory pathway from research-use-only to CLIA-certified clinical testing, including certificate type selection, personnel qualifications under 42 CFR Part 493 Subpart M, and Maryland-specific permit guidance under COMAR 10.10.03 (Medical Laboratories—Licenses).

QC Program Design

$3,000 – $6,000 | 4–8 Weeks

What's Included

Best For